1 / 5
Modified! Piper J-3 Cub for Beginners in Regular PLA!! Check it out!!
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I modified a bunch of the files so you can print them (with supports) 10% to 5% infill and top and bottom walls!
- Rating
- 5 / 5
- Likes
- 61
- Downloads
- 400
- Makes
- 0
- Views
- 2,982
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
For fuselage 2,3,4, and cover 2, you will need to lower it into the bed to get rid of the connector. As seen in the photo:
You will also need to make sure supports are on, and remember that fuselage is 0% infill, flaps are 5%. Set the wings to 0.0mm top and bottom walls and 0% infill, 0.6mm side walls!
I have included g-code for Ender 3 V3 SE.
