Oil Change Label Container
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€1.86 – €2.28 net (excluding VAT)
For file: Oil_Label_Container_Lid-Black-PetG.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.07 excluding VAT (range midpoint).
- Weight reported by the author
- 32 g
- Print time reported by the author
- 1.88 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
I made this to store a roll of oil change labels.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 20
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution
Print As is.
I made the container in 3pcs, the base with a quarter turn connection and the middle section with mating tabs. The very top is made to glue in the middle section. I did this so I would not have to do supports.
OpenSCAD
You can use the .scad files to adjust the models as you like. The var.scad has the common variables and all files read from it. This is so when you adjust one, the others models will adjust accordingly, so the fit will stay the same.
You can get the .scad files here.
I used my “qt.scad” library to do the quarter turn connection, you can get it from here.
https://gitlab.com/public_outlaws42/openScad_Project_Files/-/tree/main/libraries?ref_type=heads