Locomotive Strobe Beacon -- N Scale
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a rotary beacon model for N scale locomotives.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 48
- Makes
- 0
- Views
- 360
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a rotary beacon model for N scale locomotives. Size is approximated from photographs and other models, so size is not guaranteed. Print the model upright with the beacons facing up, the overhang should be not terrible to support. Best printed with a clear resin.
To install:
Paint the lower protrusion as needed and tint the top transparent yellow if desired.
Drill a matching sized hole (0.035in dia) in the cab of the locomotive. Insert the thinner long end into the locomotive, glue from underside of the shell. Attach LEDs if desired to aforementioned long end. Countersinking may be necessary for a flush mount if resin buildup on overhang is excessive.