Prusa MINI Turbo Button
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.30 – €0.36 net (excluding VAT)
For file: MINITurboLayerSwapSilverBlack_0.4n_0.2mm_PLA_MK4IS_17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.33 excluding VAT (range midpoint).
- Weight reported by the author
- 5 g
- Print time reported by the author
- 17.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
To celebrate MINI getting Input Shaping I made a TURBO button that bolts on to the front.
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 12
- Makes
- 1
- Views
- 886
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Guaranteed to make your MINI 33Mhz Faster!
To celebrate MINI getting Input Shaping I made a fun TURBO button that bolts on to the front of the MINI using the existing front left plate screws as an homage to the turbo buttons found on old PCs. Find a good grey or beige and black filaments to print it with.
Place two 10x2mm disc magnets inside with opposing polarity for good pushbutton action. Find some here: https://a.co/d/1Wg8KCp
Print in place. Layer swap pre configured in 3MF or paint on for MMU/XL for black text on top layer.