Westfield Leg Rest Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Leg rest adapter for Westfield 'Advancer' camping chair.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 55
- Makes
- 0
- Views
- 254
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Recently, I bought six Westfield ‘Advancer’ camping chairs, along with two leg rests. I am very satisfied. The only downside: I could only equip two of the six chairs with adapters for the leg rests, so I can't easily switch the rests between them.
"No problem," I thought, "I'll just order four more pairs of adapters." Well, I quickly abandoned that idea when I saw how much those small plastic parts were going to cost!!!
So, I simply designed them based on an original adapter and printed the eight adapters.
Unlike what I expected, the original adapter did not have a standard thread. Several design changes were necessary until I found the correct dimensions. Additionally, it took some experimentation until the 3D-printed adapter was finally stable enough.
Two sturdy versions were ultimately created:
- V4: Adapter plus 3D-printed cylindrical pin (approx. 6.6 x 47 mm)
- V5: Adapter in which you can insert a 6 x 40 mm metal cylindrical pin. Like this one.
This is the most stable version, which I personally use.
Printing information
All STL files are correctly aligned.
Layer height: 0.15mm
Perimeter: 4 (0.6mm nozzle) or 6 (0.4mm nozzle)
Infill: 100%
Support: yes, for the adapter
Assembly Instructions
Regardless of whether you use a printed pin or a metal pin, insert it fully into the opening from below until it stops.
To prevent it from falling out, secure it with a drop of superglue.
I am looking forward to your Makes! :-)
If you like this design, feel free to check out my others here.