Airbus A321neo Kit Card
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A buildable model of the Airbus A321neo
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 143
- Makes
- 1
- Views
- 491
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Airbus A321neo is a member of the A320neo family, a line of modern, fuel-efficient single-aisle aircraft. Introduced by Airbus in 2016, the A321neo stands out for its improved fuel efficiency, which is achieved through new engine options (hence the "neo," which stands for "New Engine Option") and aerodynamic enhancements, including wingtip devices called "sharklets." It can carry up to 244 passengers in a high-density configuration and has a range of up to 7,400 kilometers (4,600 miles), making it ideal for both short- and medium-haul flights. The A321neo is popular with airlines for its cost-effectiveness and lower environmental impact.
Printing Info
There are two versions you can print, one with langing gear and one without, both with and without a sprue. You can also print all parts seperatly. Happy printing!
Building Info
If the landing gear isn't balanced, carefully bend the pin at the back down. To bend the wingtips up, slightly warming them up might help. Carefully warm them up on a hot printbed or a lighter very shortly (!) and then bend them up. Then hold them for a few seconds till cooled down.