1 / 1
Engineered Deadlift Wedge Ramp
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D printed gains! Tested to 4+ plates (475lb total on barbell)
- Rating
- 5 / 5
- Likes
- 26
- Downloads
- 261
- Makes
- 2
- Views
- 791
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
After several iterations of stress testing, I've created a super strong ramp that can be dropped, thrown against the wall, smashed with a barbell, and supports a barbell loaded to 5+ plates per side (495lbs total).
In order to support all this abuse, I added reinforcements directly into the model - a visible and hidden grid pattern adds strength to the print. This causes your slicer to place more walls where it is needed.
Because of the heavy stresses involved, I suggest the following settings:
- Material: PETG (or TPU, if you know what you're doing)
- Walls: 3 Minimum
- Infill: 15% Minimum, Gyroid
- Layer Height: 0.10 to 0.16 mm
Happy lifting!