Incra TS/LS Extruded Rail End Caps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
End caps for extruded aluminum rails on my TS/LS fence system.
- Rating
- 4.5 / 5
- Likes
- 8
- Downloads
- 73
- Makes
- 2
- Views
- 260
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
I have the TS/LS on my Sawstop table saw. When I get to close to it, I either snag my pants or scrape myself on the aluminum corners or edges. I designed the extrusion in SketchUp so I could make designs that would fit the fence. One of the items I designed and printed was an end cap to provide a softer ande to the extruded rails. I print these in sets of 4 so all ends get covered. It prints SNUG on my Bambu Labs X1C. This is intentional. I align it and give it a few LIGHT taps with a dead-blow hammer, and it seats great. It's still easy to remove by tapping the exposed ends of the pieces inserted in the holes with a dowel and a dead blow hammer. I take mine off every now and again when I need to make other adjustments or add jigs.