Tray Mount for 38mm Pole / Bike Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An add-on tray for a bike stand or similar vertical pole with a 38mm to 44mm diameter. Adaptable with shim inserts!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 33
- Makes
- 0
- Views
- 163
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Garage
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Made to hold a tray like this one. Also works well with the original tray from Feedback Sports.
Without shims, the mount will fit over a pole with ~43mm diameter.
The two shims are each ~1.6mm thick. They allow a snug fit onto a 38mm pole. By themselves they will slide up and down loosely, but will be held in place once everything is installed.
I printed the shims in TPU first, but that was too slippery. Basic PLA is great. (Matte finish or CF materials might grab even better, but may be too brittle to slide into place.)
To install a tray to a pole stand, place one or both shims and then gently but firmly put the mount into place over the shims. The tray itself will clamp the “legs” of the mount and keep the whole thing in place.