1 / 2
Ratrig v-core-4 Ortbiter Filament Sensor Vertical Toolboard REMIX
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The standoff for the Vertical Toolboard for the Ratrig V-Core 4 doesn't fit if you use the Orbiter 2.0 filament sensor.
- Rating
- 5 / 5
- Likes
- 18
- Downloads
- 84
- Makes
- 1
- Views
- 677
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The standoff for the Vertical Toolboard for the Ratrig V-Core 4 doen't fit if you use the Orbiter 2.0 filament sensor. I've remixed it. Press fit in the standoff and you will not need to cut or modify the standoff. If you want added security, add a washer to the screw.
Print Settings
Perimeters: 4
Layer height: .2 - .3mm
Infill: 25%
Supports: None
4 top / 4 bottom at a min.
11/05/2024
I updated to the latest version and increased the hole size to 5.6 which will allow the standoff to fit inside.