1 / 6
Honda Eu20i battery charger plug connector. — image 1
1 / 6

Honda Eu20i battery charger plug connector.

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Honda Eu20i battery charger plug connector.

Rating
0 / 5
Likes
0
Downloads
13
Makes
0
Views
103
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution

Honda Eu20i battery charger plug connector.

Printed in abs - ½ hour print.  20% infill.  No supports.

Will need to print 2 x bottom spacer.   2 x Top spacer no cutout.  1 x body.

Fit as per pics, if too loose add epoxy or superglue.

Uses faston uninsulated male 6,35mm terminals. 

 

You can solder on the outside of the terminals to build up the thickness before crimping and assembly. The amperage output changes depending on which mode you are using. The output is not regulated so be careful with leaving a battery connected for a long time. The negative terminal must be fitted with the thin spacer towards the top as per the picture ironically I named it the bottom spacer.