Remixed Base and Front Carriage for Jo Presser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A couple remixed parts for the Jo Presser - Threaded Insert Heat Press Tool
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 48
- Makes
- 1
- Views
- 351
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
I remixed the original front carriage to allow zip ties to be used to hold the soldering iron cable out of the way.
I also remixed base design by TheSameNameTwice to add a IEC power switch, so i can quickly remove the cable and also have a switch that I can wire my soldering iron directly into.
I tightened up the tolerances in the rail holder slot, and added a hole for another t-nut to help hold it to the base.
Print Settings:
Material : I used PLA
Post Processing:
I chased the cord grip hole with a 3/8" NPT Tap
Parts Used:
Soldering Iron - Amazon
IEC Socket - Amazon
Cord Grip - Automation Direct
(2) M3 x 8mm Long FHCS
(2) M3 Heat Set Inserts