1 / 3
FT Gremlin (Chad) Nano Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an FPV camera mount designed for the Flite Test Gremlin Chad Lewis frame and the RunCam Nano…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 181
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This is an FPV camera mount designed for the Flite Test Gremlin Chad Lewis frame and the RunCam Nano camera.
https://store.flitetest.com/ft-gremlin-frame-designed-by-chad-lewis-carbon-fiber/
https://shop.runcam.com/runcam-nano/
- 24mm frame hole spacing with M3 screws
- 20 mm rather than the stock 10 mm stack spacing, which allows more room for a flight board stack
- 15 deg upward camera tilt
Print Settings
Printer: Prusa Mk2
Rafts: No
Supports: No
Resolution: 0.2 mm
Infill: 20%
Notes:
Test printed successfully using eSun PETG