Activated Carbon Mod for Ikea UPPATVIND Filter
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.63 – €3.21 net (excluding VAT)
For file: Added Core One gcode files for frame / aire_frame-i-v1_11_04n_02mm_pla_coreone_1h45m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.92 excluding VAT (range midpoint).
- Weight reported by the author
- 61 g
- Print time reported by the author
- 1.75 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter.
- Rating
- 4.875 / 5
- Likes
- 467
- Downloads
- 1,756
- Makes
- 36
- Views
- 17,275
- Reviews
- 32
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Aire is a refillable activated carbon filter mod designed for the Ikea UPPATVIND filter. Simple to print, easy to install, and has helped to improve my Quality Of Life.
IMPORTANT
Please read the instruction guide below.
I do my best to double-check and test the print profile I create. They are up to date with whatever changes I made to the designs.
3mf for Bambu or Orca Slicer can be found on the Aire Project Page at MakerWorld
I have set the grid density to 24%. If you need a denser grid, u can increase the grid density. Do note that it will increase the print time too.
UPDATE: 9 May 2025
I have uploaded the Aire Project for OrcaSlicer to make it easier for makers of other printer brands.
If you have printers with a build plate of 300x300 and above. The frame can be printed as a single piece. Hence, you only need to print build plates 4,5 and 6. (Else print build plates 1 to 5.)
Added mouse ear brim to improve print quality (as suggested by Modbot)
INTRODUCTION
The UPPATVIND is a compact air filter that uses an EPA12 filter to remove particulate matter (PM). I think it's the perfect air filter for a small workspace. What is missing is an activated carbon filter to remove any VOCs. Hence, I designed Aire which is a mod that adds an extra filter screen allowing you to refill it with activated carbon pellets.
BOM
M3x8mm BHCS -16pcs
M3 nut - 2pcs
PRINT INSTRUCTIONS
Download the 3mf file and read the installation guide below. The slicer settings are prepared to produce the grids and hexagon sections. I have tested the prints using both Bambu Lab petg-HF and Voxelpetg+ HS filament. The links to the filament I used are listed below.
Voxel (affiliated link): https://voxelpla.com/thrutheframe
Print Aire Frame I & II
Print the carbon cassette main and cover. You will need to print 2 sets of carbon cassettes.
I have prepared the print settings. You will need to click “Slice Now” to reveal the grids and hexagonal sections.
INSTALLATION
 |  |
|
|
 |  |
|
|
 |  |
|
|
 |  |
Remove the existing cover of the filter and install Aire. |
|
VIDEO
WHERE TO BUY
If you need to source activated carbon pellets, it will be great if you order from these vendors in your region using the afflink. Thank you.
CONCLUSION
To date, my designs are free to download for personal use. There is No Patreon, No Membership, No Clubs, No Subs and No OnlyFan (hahaha). If you like my designs and wish to contribute to my coffee addiction and help fund the filaments/materials needed for prototyping, doing any one of the below will be greatly appreciated: