1 / 4
OrangePI 5 Zinc-V Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the OrangePI5 that uses the Redux Robotics ZINC-V power regulator
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 214
- Makes
- 1
- Views
- 872
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
This is an OrangePI-5 case meant to take advantage of the Redux Robotics ZINC-V regulator.
It is designed to use a 40 or 50mm, 10mm thickness fan and fan filter. Assembly requires the following hardware:
- 2x #4-40 x 5/16"
- Either:
- 2x #4-40 1-1/8" screws (External case only)
- 2x #4-40 1-1/4" screws (Internal case only)
- 4x #4-40 nuts
- Optional:
- 1x M2 nut (External case only, for locking USB-C connector)
- 2x 4-40 x 3/16" screws (Internal case only, to retain Zinc-V)
- 2x 4-40 x 3/16" screws (Internal case only, to retain Zinc-V)
In addition, you will need:
- Heatsink (recommended for all cases)
- 5010 or 4010 fan
- 5010 or 5010 fan filter
There are three variants included. Internal vs External Zinc-V is whether the Zinc-V is inside the case, or external using a locking USB-C cable. Vented vs Unvented controls if there are fan holes and vents on the side of the case, the unvented variant is useful if the SBC should be completely sealed.