1 / 5
Snap-fit diagonal bearing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Assembly
- make sure all supports are removed and surfaces are smooth - nothing has warped
- Put the outer ring on a level surface - adding a bit grease will help to make the balls stick
- adding the balls - if some roll away in the center - push them back so the ring is filled
- Press the inner Ring (upside down) into to snap the bearing together.
This can't take any load in the other axial direction (pull) - the snap fit just helps it will not disassemble by itself when liftet.
If you need both directions, just add a second bearing 180° against (face to face or back to back).
(image source: https://pineriversbearings.com.au/bearings/angular-contact-bearings/ )