92 mm fan mount for 10-inch racks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 92 mm fan mount for your 10-inch rack system
- Rating
- 0 / 5
- Likes
- 35
- Downloads
- 126
- Makes
- 0
- Views
- 947
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
A 92mm fan mount for 10-inch rack systems with mounting space for electronics and a female USB type C plug.
Update (17/08/2024)
I have reuploaded the STL with better clearances and some extra space for the screws.
Parts
- Female USB-C connector
- Any 92mm fan (I recommend the Noctua NF-A9 5V or equivalent if you want to skip all the electronics parts)
- Screws for the fan. You can use the same screws you'd use to put the fan in a computer case.
- If you have a 5V Fan, you can use the USB wiring directly.
Optional
- 40mmx60mm perf board
- Any step-up converter that can do 5V to 12V. ex.: XL6019 (Only if you're using a 12V Fan).
- M3 screws for the electronics board. Standoffs are optional.
- Some soldering skills :)
- If you have a 12V PSU to use directly with your fan, you can use it instead of converting from USB.
Install the fan as shown in the picture below, with the airflow in the honeycomb grid direction, for better performance and less noise. If you need to change the orientation, rotate the whole mount before installing it on your rack.
Do you like my models? Consider buying me a coffee ;)
Print Settings
Printer Brand:
Sovol
Printer:
SV04
Rafts:
Doesn't Matter.
Supports:
No.
Resolution:
0.2 or 0.24
Infill:
20% or more
Filament:
PLA/PLA+/PETG/ABS/ASA/Nylon