Indexing / dividing plate (Teilscheibe) for lathe Paulimot PM190-V or Optimum D180x300
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.36 – €0.44 net (excluding VAT)
For file: Clip_and_screw_0.4n_0.15mm_PLA_MK4_30m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.40 excluding VAT (range midpoint).
- Weight reported by the author
- 3 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Fits to the main spindle of the lathe to use the lathe as dividing head.
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 114
- Makes
- 0
- Views
- 872
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The main part is the dividing plate fitting to the main spindle nut with:
- 0°, 90°, 180°, 270° indexes
- 1°, 5°, 15° marks
- and holes for fixing in 7,5° intervals
Best it is printed with a color change after the first 0.5mm for good contrast of the indexes. The thread can be used to clamp it on the nut for the case that the fit would become loosen some time (the print of the thread will not be perfect, due to the not ideal position, but after using it the first time it should do its job) .
The fixing screw fits to the thread, normally used for the cover and the reading clip can be attached to the steel sheet below the plate.
Depending on your printer / material, it could be that the fit of the fixing screw is not perfect. Then you have to measure and rescale the screw (somewhere between 97 and 103%) to get the best fit.