Positioning Square Organizer (Hattori 120mm)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Organizers for 120mm positioning square including clamp jaws
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 11
- Makes
- 0
- Views
- 56
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Organizer trays for positioning square jaws plus holder for 120mm positioning square
Material needed
Trays use 4mm paracord (with a knot at the end) as the handle.
The handle connects to the square holder with 2x ISO7380 M3x12 (e.g. schraubenking) screws and heat set inserts M3x5.7mm (e.g. cnc kitchen)
Printing
I printed the jaw trays using a 0.4mm nozzle, lightning infill 15%, 3 walls, 4 top and bottom layers
For the square holder i used also a 0.4mm nozzle, 3d honeycomb infill 15%, 4 top and bottom layers.
I used 2 walls for the square holder body and 4 walls for the handle.