Sidewinder X2 Fan duct/mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
4010 Fan Mount (40mm*40mm*10mm) for Artillery Sidewinder X2
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 14
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Here is a 4010 fan mount (40mm x 40mm x 10mm) for Artillery Sidewinder X2.
You need :
- 1x 4010 Fan 24V
- 2x 3x20 mm screws with bolts
Step 1 : Glue the two parts that you printed, making sure to do it the right way
Step 2 : Push the two bolts into place using a soldering iron
Step 3 : Remove the blue cover and connect the fan to the 2 pins (CHECK THE VOLTAGE OF YOUR FAN, I USED ONE OF 24V)
Step 4 : Place the part using the two screws from your printer to the blue aluminum plate
Step 5 : Screw in the fan and use the two small printed tubes if your screws are too big (check the direction of the fan so it blows in the right direction)
I recommend using a nozzle heat resistant filament such as PETG