Engagement Ring Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution — Noncommercial
Box for engagement ring with gearbox.
The box has a ring stored inside, which turns 90 degrees after opening the box. Here is video https://youtube.com/shorts/xTxo3VGdrIg
Information:
But right cover containe space for heart. But if you don't want to have a heart on the box, you can only use the left model for both cover.
After printing, it is necessary to clean/smooth the plastic gears and the cylinder with a needle file. If the plastic parts are not cleaned with a file, they can get stuck. To make the gears move more easily, we can add some grease to gear_horizontal.
Attached are several models of holders for rings with a diameter of 15, 16, 17, 18, 19 mm
Only magnets and ring holder is they are stuck with glue.
Dimension case: 58x42x20 mm
Neccesary parts:
- glue
- 4x cicle magnets 5x2mm
- I recommend a little vaseline for gears
Print settings:
Infill: minimum 5%
Material: PLA
noze: 0.4
Quality: 0,2 or 0,1mm
Support required for:
- cover left
- cover right
- cylinder_top
- cylinder_bottom
- holder