Multimeter Probes Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Multimeter Probes Holder
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 49
- Makes
- 0
- Views
- 382
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
My multimeter (UNI-T UT61E) probes hang loose and can get untidy. The probes dangle and can get caught and break. To help reduce this dangle problem (but not eliminate), I came up with this design to allow the attached probes to be "parked" to the side of my multimeter. The probe cables still dangle, but every little bit helps.
The probes holder allows both the probes to be secured to the side of my multimeter, but easily accessible for use. The probes holder is made from a flexible TPU filament and attached to my multimeter with double sided tape. My probes are 10mm in diameter.
My print is made in eSUN TPU White filament, with 0.2mm layer height and 25% infill on a Bambu Lab X1 Carbon printer. Print supports are required.
I hope that you can find this print useful, too. If so, you can support my work by buying me a coffee …
Buy Me a Coffee
Remember to leave me some feedback or even a tip to keep me enthused to make more of these drawings.