1 / 3
90mm Stormwater Pipe Cutting jig
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This jig is to assist cutting 90mm PVC Pipe typically used for storm water drainage.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 56
- Makes
- 0
- Views
- 920
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
It has tabs to screw it down on a support timber. The cutting slot is set up for a normal handsaw but is not quite wide enough for the ridge on the top of a Tenon saw (but you could rotate the pipe to complete the cut ).
There is a inspection hole at the top to make it easier to find the measure/cut mark.
Supports are needed for my recommended orientation (as shown in the slicer view).
I used PETG for durability and is about a 23 hour print time