Half dart stryfe pusher that actually looks nice
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Convert your stryfe to half darts in style
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 132
- Makes
- 0
- Views
- 607
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to convert my stryfe to half darts, but couldn't find a pusher that I liked, so I made my own!
Some notes:
Not compatible with unmodified daybreak cages, since their dart guide interferes with extended pushers. You can fix that with a bit of cutting, or you can use a cage with a different dart guide (like the kelly cage).
You will need to use a magazine adapter that puts the mag at the front of the magwell. This is the one I'm using (it's pretty great) but the worker adapter should work just as well.
Print settings don't matter too much, but you can enable top layer ironing in your slicer for a super premium feel.
I printed mine in PLA, but any material should work fine.
Make sure to lube the whole trigger and pusher mechanism. You might be surprised how much better that makes the trigger feel. (I used slug slym, but any silicone oil should work)
There is a rib in the stryfe shell that interferes with the feed lips of half dart mags. Make sure to trim that off or you will have feeding issues. The rib is in the shell half with all the screws, and you should be able to see it through the jam door.
Here's the Onshape link: https://cad.onshape.com/documents/47954e3dbaa2b1e0379dda47/w/8213fdb74a26e052f314814a/e/dea506fab44d2db87a05fa7b