RIGOL LA Probe Enclosure
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an enclosure for the knockoff RIGOL logic analyzer sold on eBay:https://www.ebay.com/itm/224648789536There are…
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 13
- Makes
- 0
- Views
- 128
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is an enclosure for the knockoff RIGOL logic analyzer sold on eBay: https://www.ebay.com/itm/224648789536
There are 2 parts - after printing they are to be glued together. I printed them with PLA and glued them with Krazy Glue (Cyanoacrylate adhesive). After the glue is dry the logic analyzer board is then inserted into the bottom and secured with four M2.5 x 5mm or 6mm screws. (you may have to drill the four holes in the main body with a 2mm bit to get the screw to start.) I added a piece of 3M 9448A to the bottom to give it a non-slip grip https://www.amazon.com/dp/B09XJ2TYTM?psc=1&ref=ppx_yo2ov_dt_b_product_details
Category: Electronics