1 / 6
Gimbal Electronics Container Adapter (Or any 50x50mm PCB)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an adapter for a gimbal PCB board with 45mm hole spacing, tipically a 50x50mm pcb board. It's useful if you…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
This is an adapter for a gimbal PCB board with 45mm hole spacing, tipically a 50x50mm pcb board. It's useful if you can't use, for any reason, the board screw holes. The PCB is secured between the two pieces of the adapter.
Instructions
Print with 2 perimeters, 3 top and 3 bottom and 30% infill at 0.2 layer height
Category: Electronics