1 / 2
ERCF v1.1 Flashforge 5DM Pro Extruder Fitting
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extruder fitting to avoid bowden tube from popping out during filament changes
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 30
- Makes
- 0
- Views
- 491
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
Enraged Carrot Rabbit v1.1 Extruder fitting that sits atop Flashforge AD5M and AD5M Pro extruder to prevent the Bowden tube from popping out during ERCF Filament Changes.
Assembly:
The Bowden tube slides through from the pneumatic fitting into the AD5M extruder housing, providing a clean and clear pathway for the filament to pass. Screw in the M3 20mm on each side replacing the 6mm Flashforge provided M3 screws.
Recommended Print Settings:
Type: PETG
Walls: 5
Infill: 100%
BOM
- 1x PC4-M10 fitting: thread M10/6mm, inner diameter 4mm
- 1x 1.75mm Bowden tube 2.5mm OD
- Optional: Gorilla Glue if PC4-M10 is loose in print.
- 2x M3 20mm