Webcam cable "channel"
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€0.83 – €1.01 net (excluding VAT)
For file: WebCam_Wire_Hidder_with_magnets_0.4n_0.2mm_PETG_XLIS_48m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.92 excluding VAT (range midpoint).
- Weight reported by the author
- 15 g
- Print time reported by the author
- 48 min
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a webcam cable channel for hiding a webcam's cable within a XL enclosure.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution
This is a webcam cable channel for hiding a webcam's cable within a XL enclosure. It has slots for two 20x5x2mm magnets and could honestly be used for anything you wanted to hide that is 3.5mm or less in diameter. Quick build using Fusion360. I'm including a picture of the webcam mount which I got from @carlmmii_321665 (https://www.printables.com/model/967586-xl-enclosure-camera-mount-for-c922-webcam/comments), this shows how I routed the cable from the mount through the back of the XL enclosure.