Angle Setter for Chisels and Plane Blades
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.58 – €1.94 net (excluding VAT)
For file: Chisel Setting Block v8_0.4n_0.2mm_PLA,PLA_XLIS_1h20m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.76 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 1.33 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This model helps you consistently set the correct angles for sharpening your chisels and plane blades
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 70
- Makes
- 0
- Views
- 307
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
This a parametric model of a Angle Setting Block for chisels and plane blades. It is important to have consistent bevels on your blades and this setup block keeps your angles correct every time. Just line up the chisel or plane blade with the block and slide your holder up to the edge. The 8x3mm magnets keeps your blade aligned to the blocks as you tighten down your holder. Happy Printing!