Festool Domino DF500 MFT3 dock
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€8.41 – €10.28 net (excluding VAT)
For file: festool stand mft_0.8n_0.4mm_PETG_MK3S_5h33m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.35 excluding VAT (range midpoint).
- Weight reported by the author
- 210 g
- Print time reported by the author
- 5.56 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Dock to attach Festool Domino DF500 to MFT3 tables.
- Rating
- 5 / 5
- Likes
- 45
- Downloads
- 211
- Makes
- 0
- Views
- 1,925
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dock for holding the DF500 up, to the MFT3 table aluminium profile.
Slide the dock then use 2 T-Nut from the festool@ mft accessories, 2 m5 nuts and 5x20mm bolts to hold the dock to the MFT table rail.
The DF500 slides and is held tight by gravity and the pins from the execellent Izo@'s holder.
No clamps needed: there is a little flex, it does not impact operation. Clamps can be used to remove the flex:
