Stormtrooper HueForged
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a HueForge of a Stormtrooper
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 16
- Makes
- 1
- Views
- 139
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Share Alike
Project: Stormtrooper.hfp
Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm
Filaments Used:
PLA+ GST3D BLACK Transmission Distance: 0.7
PLA+ GST3D RED Transmission Distance: 8.9
PLA+ GST3D BLUE Transmission Distance: 4
PLA+ GST3D Ice Blue Transmission Distance: 34
PLA Jayo White Transmission Distance: 15
PLA+ GST3D WHITE Transmission Distance: 9.5
This print uses 6 unique filaments
Swap Instructions:
Start with BLACK
At layer #11 (0.56mm) swap to RED
At layer #14 (0.68mm) swap to BLUE
At layer #15 (0.72mm) swap to Ice Blue
At layer #29 (1.28mm) swap to White
At layer #32 (1.4mm) swap to WHITE for the rest.