Multicolor Print “Ballern (Bicycle)” on one layer
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.73 – €0.89 net (excluding VAT)
For file: Master Zahnrad_0.2mm_PLA_MK3S_5m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.81 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 49.2 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
This is a Multicolor Print “Bicycle” , all on one layer, with several Filament-Changes on same layer
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 330
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Hello,
Here I like to share my Multicolor Card “Ballern (Bicycle)” (which means something like “full steam ahaed” :) ), all on one layer, with several Filament-Changes on same layer
- look at the reference picture to match the original colors
- or choose free which colors you have and or like
- this all was possible by constructing single parts in 3D CAD, then I created single G-Code files for each of them, and finally I manually pasted them together in one Master G-Code, with lots of concentration and focus
- (you can ignore all files, apart from Master G-code, if you have 0,4 Nozzle)
This technique can be recommended, super great results can be achieved on one single layer, and looks very clean
I look forward to see your results ;)
Happy printing
Cheers,
Dave