1 / 7
architect lamp base (desk clamp)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
custom base for a cheap architect lamp for clamping to desk
- Rating
- 4 / 5
- Likes
- 59
- Downloads
- 412
- Makes
- 6
- Views
- 2,121
- Reviews
- 9
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Public Domain
I bought a cheap architect lamp from amazon, but the original base/clamp of the lamp didn't fit my desk, so I made my own.
The clamp is made of 3 parts.
- clamp body: Print laying on the side, so the layers are in the same plane as the bending forces. I recommend at least 3 shells, better 4 for good strength of the part. Infill as you like. I would also recommend to use supports if you have problems with bridging or overhangs.
- thread insert: Print laying flat, that way the surface of the threads is optimal. Use this part to adjust the fitting to screw and clamp body via horizontal expansion parameter
- screw: Print with screw head on the buildplate
- tightening tool: print if you need to. You can tighten the screw with gloves as well.