Halloween - Michael Myers Lithophane Night Light
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
From Haddonfield to your living room.
- Rating
- 5 / 5
- Likes
- 32
- Downloads
- 95
- Makes
- 1
- Views
- 464
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This night light panel is scaled to 34.93x146.9x100mm on the build plate.
Here are links to the night light and LED bulbs I used for this project, found on Amazon.
LED Bulbs - I chose these bulbs primarily since they are LED they wouldn't generate enough heat to warp the PLA and I really liked the warm white effect they provide.
The litho shade was designed with the night light holder fit to the dimensions of the night light I had chosen to use. The clip section is 16.82mm wide and 4.72mm thick. If you are not using the linked light above, as long as it's ~ 17mm in diameter where the bulb is held it should work.
The lithophanes pictured were printed in Polyterra Cotton White. Previously I was using Overture white but really like the way matte finish impacts details for these.