Workmate_Leg_Clip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Clip for holding the leg of a Black & Decker Workmate 225 portable bench in either the "open" or "closed" position
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 91
- Makes
- 0
- Views
- 267
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
LIke nearly every owner of a Workmate portable work bench, I've been dealing with broken leg clips since the day after I bought my Workmate. After searching and trying the available stl designs on the popular sites, and having every one of them break faster than the original part, I decided to try my hand at a design.
In my case, I used 95a TPU with 0.2 mm layer height on my Bambu P1P. Print on the clip's side and make sure to use supports (very minimal supports required)
Taking the pin out of the workbench is pretty easy with a hammer and screwdriver. After reassembly, you may need to open/close the leg a few times to loosen up the TPU enough, but at least it won't snap into a billion pieces. :)