1 / 4
Flat-backed funnel
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Created to fit into 3" ABS tubing that we use as feeders for our chickens.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 24
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This model has pretty thick sides and a flat back that helps it not hit the wall behind the pipe that's attached to the wall. It is large, but I was able to print it on my Ender 3 Pro without issues. Fits on a 220mm 220mm bed.
No brim should be required, however supports are necessary to support the spout.
How I Printed It
- Filament: PETG
- Layer Height: 0.28mm
- Wall Thickness: 1.6mm
- Top Surface Layers: 2
- Top/Bottom Thickness: 1.18mm
- Infill: 30%
- Infill Pattern: Triangles
- Supports: Yes (touching build plate)
- Adhesion: Skirt