Soda bottle watering cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I saw a dad showering a kid from a drinking bottle. It did not look so practical. So i made a shower head to any…
- Rating
- 4.6 / 5
- Likes
- 58
- Downloads
- 681
- Makes
- 4
- Views
- 2,416
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution
I saw a dad showering a kid from a drinking bottle. It did not look so practical. So i made a shower head to any standard plastic bottle! It works nicely.
Update 23.7:
I did a little bit smaller version of the cap. This one gives a much lower flow. This means that after swimming in the sea a short haired person can shower off the seawater with less than 0,5l water!
This new cap is named "3Dan_soda_waterer_small_flow.stl"
The newer version has also a V-shaped bottle contact surface which functions as a seal. A little bit of water is still leaking from the threads but I do not see it as a problem.
Please see an awesomeGIF animation of the product in use!
https://giphy.com/gifs/2uIiCuINO6ZKx6FyR6/html5
Update 4.7.20:
User "kickformoney" discovered that a G20 20x3 mm O-ring fits in the cap and seal it completely. Nice find!
Print Settings
Printer Brand:
FlashForge
Printer:
Creator Pro
Doesn't Matter
Supports:
No
0,1
Infill:
20%
Notes:
I printed the part in the pictures in ABS+. It turned out nicely. I used 0,1 mm resolution to get the threada as good as possible. 0,2 mm is fine also. The water holes are 1,5mm in diameter.
How I Designed This
I found the cap thread here at thingiverse. Then i built the watering part on that part.rnrnDesignes in Fusion360 and printed with Simplify3D
Category: Outdoor & Garden