1 / 6
Banana Banana Holder
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Banana Banana Holder
- Rating
- 0 / 5
- Likes
- 24
- Downloads
- 108
- Makes
- 0
- Views
- 1,315
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
Banana Banana Holder
Printing instructions:
- Supports needed from the print bed for the base part (upside down printed)
- Using a brim could help if you face problems with adhesion.
- 0.2 speed profile
- Textured sheet recommend:
- If you use a textured sheet too, let it cool down completely after the print and wait for the part gets loose by itself. Do not pull on it to avoid ripping off the letters!
- In my case it takes 45-90 minutes after the print has ended and the part just lays loose on the print bed.
- Do not touch the print bed and clean it with Isopropanol alcohol before printing.
Parts needed:
- 2x M3x25 screws
- 2x M3 nuts
Note:
- Have not yet printed this myself. If you have suggestions to improve it, please let me know. =)
Happy printing =)