Spiral Fall for Gravitrax V2 (capable of handling 20cm~ heights)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Very tall spiral fall for Gravitrax. Height adjustable, utilizing 6mm poles like straws. Optional inlets available.
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 131
- Makes
- 1
- Views
- 814
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Building Toys
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
----
I modified the previous model to allow the ball to spin at high speeds with a larger diameter, while ensuring it remains stable and does not topple over even when it exceeds 20cm in size.
previous model : https://www.printables.com/model/980242-spiral-fall-for-gravitrax-height-and-rotation-angl
Firstly, 6mm diameter poles are required - the ideal material would be inexpensive and easy to obtain, less rigid than metal, and easily cuttable. I reccomend plastic or paper straws.
Given the availability and affordability of 6mm plastic or paper straws in Japan, I decided to utilize them. I assume they are also readily available outside of Japan.
Each of the base, top, and middle sections is designed to accommodate Gravitrax balls as weights.
To effectively suppress oscillations, I recommend to place at least one ball in both the base and top sections.
Additionally, the base, top, and middle sections are connected only by poles.
This is a precautionary measure, as I believe that connecting them using rings would make the structure more susceptible to collapse in the event of significant oscillations.
----
Please prepare a pole and print ”size test" file.
Then, try to insert the pole into the ring. Between options "6.1" and "6.2", choose the one that the pole can fit through but with a tight fit.
Generally, can be printed without support.
Optionally, inlets can be added. For design reasons, the ball should be loaded onto a rail rather than directly onto the tile. (This is usually the case, I think.)
----
Assembly example : base + 4×middle(360deg) + top + cap with 6mm plastic straws