Leaf Clip Bookmarks
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
I wanted to make something both aesthetically pleasing and useful using some gold filament I had, and I think that this set of 4 unique leaf bookmarks is exactly this blend of form and function; The leaf, both simple and elegant, also serves as a clip securing the bookmark in place. All in all, these bookmarks are a must-have for any of you book-lovers out there. To further elevate your new print, consider attaching a tassel as seen in the last picture above.
Dimensions
The bookmarks have a diameter of 7.5cm (2.95"), with a thickness of 1.32mm (~1/16''). Feel free to scale to your liking, but scaling down by too much might make the bookmark weak and prone to snapping.
Printing
I used: 0.4mm nozzle, 0.28mm layer height, 100% Infill (Linear Pattern), 4 Walls, No supports, Brim enabled.
Caution
Be very careful when removing print from printbed to avoid damage. It is imperative that you wait until the print has completely cooled down.
Happy Printing!
[Update: Improved the look of one of the stems.]