Voron 2.4 - CPAP /Carbon Pellet/ HEPA Filter Exhaust w/ Muffler & PG7 Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Custom CPAP + HEPA Filter + Carbon Pellet Exhaust for Voron 2.4
- Rating
- 5 / 5
- Likes
- 76
- Downloads
- 265
- Makes
- 2
- Views
- 3,085
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I wanted a rear exhaust that worked with CPAP and also had a HEPA filter + carbon pellets. This is my solution to my own problem. Please let me know if you have any troubles printing this model at all.
I haven't tried this design out for other printers, namely Trident, or Micron. Please try this out and let me know if it works!
[ONLY ] Muffler Remixed From: https://www.printables.com/model/831149-voron-cpap-with-muffler
Instructional Build Video:
Updated: March 07, 2025
Step File has been added.
Updated: October 02, 2024
As per request I've added M3 heat insert versions of the muffler and Exhaust Grill. Muffler will be using M3x35 bolts.
Updated: September 22, 2024
PG7 Mount Added to Grill and Base Plate. Please pick these items from the folder below. Installation is the same as CPAP tube. Route cable from Exhaust Grill to the side hole where CPAP wires will be exiting on the right side of Base CPAP plate. Then route all the way down the back of the printer. Note that PG7 is a M12x1.25mm thread so double check this before printing.
The can cable that is spec'd to fit is this one (Roughly 5.5mm in diameter cable will work): https://biqu.equipment/products/bigtreetech-ebb-sb2209-can-v1-0?variant=40273695342690
Print Settings:
PETG/ASA (For parts within build chamber)
Walls: 4
Top/Bottom Layers: 5
Infill: 20% Cubic, Grid, Gyroid
Hardware List:
5x - M3x12 SHCS
12x - M2x10 TFS
8x - M3x25 SHCS
2x- M5x10 BHS
2x- M5 Roll in T-Nuts
8x -16x- Magnets
1x - Roomba HEPA Filter
Epoxy, PTFE Tube, & Nevermore Carbon Pellets
Items Needed For Build:
- Tools Link (Optional) : https://www.amazon.com/s?k=rc+hex+toolset
- Amazon Roomba Filter: https://a.co/d/8MPlZKJ
- Nevermore Carbon Pellets : https://kb-3d.com/store/linneo/662-7983-original-nevermore-activated-carbon-filter-media-multiple-sizes.html#/954-size-small
- Fans: https://a.co/d/3PJywBT
- Magnets: https://a.co/d/0IhSs5H
- 5-Min Epoxy: https://a.co/d/184pKCi
- Precision Q-tips: https://a.co/d/58X8T0O
- PTFE Trimmer: https://a.co/d/fcV6LFP
- VHB Tape: https://a.co/d/2H05miD