Oventrop UniBox Cover for Bosch Smart Home Radiator Thermostat II
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.35 – €6.54 net (excluding VAT)
For file: blende_6h10m_0,24mm_225C_PETG_ENDER3PRO.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.95 excluding VAT (range midpoint).
- Weight reported by the author
- 75 g
- Print time reported by the author
- 6.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A cover to mount a Bosch Smart Home Radiator Thermostat II inside an Oventrop UniBox
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 25
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- GNU General Public License v3.0
This cover allows you to install a Bosch Smart Home Radiator Thermostat II within an Oventrop UniBox, enabling control of your underfloor heating circuit.
Important: Please note that the peg spacing and dimensions from the original design may not be fully accurate. Due to slight damage to the slots in my UniBox, I was unable to verify the fitment and had to secure the cover with tape. As such, I recommend using this model with caution and making adjustments as necessary based on your own installation.