1 / 5
Celtic Cross Mountable - Embedded M3 Nuts
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small celtic cross remixed design to allow for it to be mountable with m3 screws
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 71
- Makes
- 0
- Views
- 232
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution
Printed in Bambu PLA Matte - 15% infill - 0.08mm layers with 0.4 nozzle
Hardware required:
- 4x M3 nuts
- 4x M3 bolts (whatever length required)
There is some excess space left after the nut to allow some leeway with the screw length
Need to set a pause in the slicer to allow for adding the embedded nuts
Added a template guide to allow for drilling holes (notches are the 90 degree marks because of offset holes)