1 / 3
Scoop / spoon holder for cylindrical containers
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a simple model to be used with a rubber band as a non-permanent spoon or scoop holder for cylindrical containers
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 71
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Use with a rubber band to attach on the outside of a cylindrical container. Keep your scoop or spoon within reach without having to bury it in the container.
I originally made it to hold the scoop for my turtle's food container. For reference, the container as shown in the photos has a diameter of 91.2mm.
The hole the handle of the scoop or spoon passes through is 12.25mm by 5.6mm (obviously depending on your print settings. Printed upside down without supports.