Universal Neptune 4 Camera Mount (SLIDE-IN and SCREW-IN)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mount any M6 hole camera in the Elegoo Neptune 4 Series X-gantry
- Rating
- 3.5 / 5
- Likes
- 19
- Downloads
- 256
- Makes
- 2
- Views
- 956
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Created a left-side camera mount for the Elegoo Neptune 4, designed to fit a Logitech C922 Pro. The mount allows adjustable positioning using the 18mm slot for various angles, without interfering with the touchscreen.
To install, print with supports under the slot and slip overhangs, ensuring each clip forms the V-shape shown in the 3D model preview. Once printed, just slide it in, and the fasten with the provided screw.
If your webcam service is disabled, SSH into your printer (user: mks | password: makerbase) and run the following commands:
sudo systemctl enable webcamd
sudo systemctl start webcamdFirst one enables the service on boot, second one starts it for the current session.
In Klipper open up your settings and create a Default camera. Leave the settings as the are (if you need to flip the image you can do so later on).
In your configuration folder should be a webcam.txt. Edit to your needs - USB camera is always /dev/video4.
Print settings: Optimized for a 0.4mm nozzle with 0.2mm layer height. Supports are required for the slot and slip overhangs and 15% infill is recommended!
