1 / 2
USB Type-C Mod for BOSCH IXO Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Turn your BOSCH IXO case into a charging case!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 257
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Parts
- USB C breakout board
- 20mm wide
- 14mm deep max
- Please make sure they have 5.1k Ohm (aka 512) pulldown resistors on the cc pins!
- This requests 5V via USB PD
- 2x pogo pins
- Pictures use P75 J1, but anything with similar body dimensions will do!
- Dimensions
- 16.54mm long
- 1.02mm body diameter
- 2 short wires
Additional Info
- Contacts
- Top: Ground
- Bottom: 5V
- Recommended print orientation: Face down
- Mounting: Double sided tape against the bottom wall
No guarantees, but if you want altered dimensions, feel free to ask!