3 port USB hub for Rigol DHO800/900 series Oscilloscopes
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A design to extend the single USB port on a Rigol DHO800/900 oscilloscope to three ports for your WiFi dongle, Mouse, or
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 50
- Makes
- 0
- Views
- 565
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
******* PCB for USB A plug temporarily removed due to an error *******
This is an enclosure for a 3 port USB extension hub to fit to a RIGOL DHO800/900 series Oscilloscope allowing three devices to be used with the single USB port whilst still allowing the fitting of the Logic Analyser option (on the DHO900 series).

The two halves of the enclosure are screwed together with 5 M2 countersunk screws about 4mm long.
There are two PCBs, one for the 3 port hub and another to mount the USB male connector to, the two arre connected by wires that you will need to solder on.
The PCB manufacturing files are included in the ZIP, they are created in EASY EDA Pro, I have not used the zip files as I sent them to JLCPCB directly from within the software.