Blanko Mülleimer Einsatz - Trashcan replacement
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.91 – €6.00 net (excluding VAT)
For file: Blanco Mulleimer Einsatz_0.4n_0.2mm_PETG_MK4IS_4h10m_mirror.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.45 excluding VAT (range midpoint).
- Weight reported by the author
- 102 g
- Print time reported by the author
- 4.16 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Replacement helper for Blanco trashcans - Einsatz für Blanco Mülleimer.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 12
- Makes
- 0
- Views
- 346
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
I decide to design this helper because our brand new kitchen only has only 3 trashcans with 15 liters of capacity each.
Instead of the three 15 liters trashcans (Blanco 229330) we wanted to have two 17 liter trashcans from Blanco (Blanco 235432). As the 17 liters trashcans have a different size they don't fit properly in the trashcan holder. So this helper comes into play.
You only have to print the parts and glew them together. I also mounted a small metal plate on it to make it more robust. Not nice - but hey: no one will ever see it!
Print in PETG with 0.2mm layer height. Infill 10%.
It might fit to other Blanco trashcan holders. Therefore you can adjust the size of the “Mittelstück”.