1 / 6
Talon Knife
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Props
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Talon knife inspired by Counter Strike
Can also be printed on small bed printers like the a1 mini or prusa mini.
Print as detailed as possible - for the blade I used a 0.2mm nozzle and a layer height of 0.06mm.
Theoretically no glue etc is needed, but I would recommend using it.
Might need some finishing, sanding and filling.