Floodlights for Voron 0.2
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print floodlights for your Voron 0.2 using WS2812B addressable RGB strip
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 13
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution
Easy to print floodlights for your Voron 0.2 using cheap WS2812B addressable RGB strip. If you fit it at a 45 degree angle on the bed it is printable on the 120mm plate.
It fits the strips that are 10mm wide, and with 60 LEDs/m you get 8 LEDs on each side, plenty to light up the work area at night.
The mounts contain a hidden channel for a return data cable in one side, so you can mount both lights as one long “virtual” led bar.
Parts needed:
2 x M3 nut
2 x 8mm M3 bolt
Fit each of the nuts on the top of each upper 1515 extrusions and use the 8mm M3 bolts to fasten each side of the bars to the printer.